News

Updating the libraries of 3D models FP from 16/09/2019
16.09.2019

Frigopoint Russian Plant of Refrigeration Components is pleased to announce the readiness of 3D models of refrigeration components manufactured by the company.
All 3D models comply with data presentation standards established in the territory of the countries of the TS TS GOST R ISO10303-1-99 and the EU ISO10303. 3D models have the extension .stp and are compatible with the most common CAD programs.


New safety valve FP-SV (MP) -038 (for R410A)
9.09.2019

The Russian refrigeration components factory Frigopoint announces the launch of the production of safety valves for linear vessels MP - FP-SV (MP) -038 with a nominal pressure of 45 bar.


FP: annual planned production holidays 19/08/2019 - 01/09/2019
9.07.2019

The company Frigopoint reminds of the annual summer planned vacation. In the period from 08/19/2019 through 01/09/2019


New Angle Valve FP-RV-318
3.07.2019

The Russian plant of refrigeration components Frigopoint announces a new angle valve for welding FP-RV-318. Angle valve has steel connecting pipes, welding DN80 mm. The valve does not have an anti-corrosion coating, therefore, after installation, it is necessary to apply anti-corrosion protection. Operating pressure 45 bar. The overall characteristics of the valve are presented below:
 
The valves are designed as stop valves for cyclone oil separators and refrigerant receivers of 300 and 350 liters.
3D models can be downloaded from the link >>>


New refrigerant receivers FP-LR-300/350 and FP-LRH-300/350
10.06.2019


The Russian factory of refrigeration components Frigopoint began mass production of vertical and horizontal refrigeration receivers FP-LR (H) -300 (350) with a volume of 300 and 350 liters, respectively. Receivers have 450th shell diameter and 4 sight glasses. A distinctive feature of the vessels are the connecting steel pipes of 89 mm for welding. We recommend using an angular shut-off valve for welding FP-RV-318 as a valve. Receivers have the following characteristics.
 
3D models are available in the corresponding section of the site.
Receivers available in a warehouse in the Moscow.


Price-list (Russian) updated
4.06.2019

The company Frigopoint makes changes to the price list from 07/01/19. The changes affected the following items:

Added new angle valve FP-RV-318-318
Added new rotary valve FP-RV-1-038F;
Added gasket to FP-SDF filters;
The list of the range of the PC set FP-SV-038 has been increased;
Removed from additional nomenclature FP-SG-058, FP-VAL-034 (18 mm);


Updating the libraries of 3D models FP from 03/12/2019
12.03.2019

The Russian plant of refrigeration components Frigopoint is pleased to announce the availability of 3D models of refrigeration components produced by the company.
All 3D models comply with the data presentation standards established in the territory of the countries of the TS TS GOST R ISO10303-1-99 and EU ISO10303. 3D models have the .stp extension and are compatible with the most common CAD programs.


FP product catalog 2019 (28 bar - 45 bar)
18.02.2019

The Russian factory of refrigeration components Frigopoint has released a new catalog of refrigeration components 2019 in the catalog presents both models with a working pressure of 28 bar and a working pressure of 45 bar for refrigerant R410a.


FP wishes you a happy New year
27.12.2018

The Russian plant of refrigeration components sincerely congratulates the refrigeration community on the coming 2019 year. All year we tried to be most useful to you, please accept our congratulations on this holiday. We wish you happiness and good luck!


The restriction on the use of SV-038
25.12.2018

In view of detection of precedents of failure of safety valves FP-SV-038 when used with vessels of other manufacturers, due to the ingress of foreign bodies under the seal of the safety valve. Frigopoint informs about the restrictions imposed on the use of safety valves with vessels of other manufacturers.


Frigopoint changes the design of sight glasses on refrigerant receivers (FP-LR and FP-LRH), oil rece
17.12.2018

Frigopoint changes the design of sight glasses on refrigerant receivers (FP-LR and FP-LRH), oil receivers (FP-OR) and cyclone oil separators (FP-OS) from 09/1/2019


FP: annual planned production holidays 31/12/2018-22/01/2019 .
17.12.2018

The company Frigopoint recalls the annual winter planned vacation. In the period from 31/12/2018 to 22/01/2019 inclusive, the Frigopoint plant will not operate.


New refrigerant level sensor FP-ELS2 (IP67)
3.12.2018

Laboratory for the production of electronic components FeedWay of the plant components of the refrigeration FRIGOPOINT in November 2018, has started serial production of new electronic sensors refrigerant level FP-ELS2 in the new vandal-resistant housing with high protection class IP67 shell.
A feature of the sensor is the calibration of the Hola sensor under the refrigerant density, which allows the use of a level sensor to measure the upper and lower levels.


New reusable refrigerant collection cylinders FP-CR-30Y and FP - CR-60Y with two-phase valve
26.11.2018

The Russian plant Frigopoint in October 2018 began mass production of cylinders for the collection of refrigerant FP-CR-30Y and FP-CR-60Y equipped with a two-phase valve


Новое исполнение обратный диф. клапан для линии возврата масла FP-DV-038-35
19.11.2018

The Russian plant of components of refrigerating appliances Frigopoint developed and started in a series new execution of the return differential valve for the line of return of oil. Changed the material of manufacture to galvanized steel (previously made of brass).


New reusable FP-CR-15Y refrigerant collection cylinder with two-phase valve
12.11.2018

The Russian plant Frigopoint in October 2018 began mass production of cylinders for the collection of refrigerant FP-CR-15Y equipped with a two-phase valve.


New FP-URL4 went on sale
6.11.2018

Laboratory for the production of electronic components FeedWay of the plant components of the refrigeration FRIGOPOINT in October 2018 has started serial production of the new electronic oil level regulators series FP-ERL4 in the new vandal-resistant housing with high protection class IP67 shell.


Chillventa Results
29.10.2018

The staff of the plant Frigopoint expresses gratitude to customers and visitors who visited the stand FP, at the exhibition Chillventa 2018 held from 16 to 18 October 2018 in Germany, Nuremberg.


The Russian plant Frigopoint launched a shop for the production of collapsible filters.
26.09.2018

Frigopoint apologizes to customers for the long-term start-up of the collapsible filter project associated with the launch of several new technologies, in particular the technology of serial production of threaded flanges, the technology of the 2nd generation of copper welding with steel Cu-St FP Weld, as well as the preparation of new production facilities.


FP invites to Chillventa pavilion 7a booth 307
17.09.2018

The Russian plant of refrigeration components "Frigopoint" will take part in the international world specialized exhibition of refrigeration equipment Chillventa 2018 held in Nurnberg Exhibition Center in Nuremberg from 16.10 to 18.10 and invites you to visit the stand of the company №307 in pavilion 7A.


The Russian plant Frigopoint increased the territory of the main plant to 5000 sq. m.
4.09.2018

Russian plant components of the refrigeration Frigopoint acquired the territory of the plant and adjacent plants, thereby increasing the footprint by 2 times. The transaction occurred in may 2018, the overall footprint of the main building of the plant will be 5000 sq. m., laboratories of the electronic components 800 sq. m.


Vessel-online - free service of calculation and selection of FP equipment
19.07.2018

Vessel-online-online service for selection/calculation of refrigeration equipment components http://frigopoint.com/ru/vessel/online, from the Russian plant of refrigeration equipment components Frigopoint.


The plant Frigopoint-annual summer planned industrial holiday 13/08-27/08.
16.07.2018

The company Frigopoint reminds of the annual summer planned vacation. During the period from 13/09/2017 to 27/09/2017 inclusive, the Frigopoint plant will not work. Production output is produced according 01/08-11/08.


FP-ERL4: field tests under water passed
26.06.2018

Laboratory for the production of electronic components FeedWay of the plant components of the refrigeration Frigopoint is pleased to announce that 4th generation electronic oil level regulators FP-ERL4 passed field tests enclosure protection FP-ERL4.


Cyclone oil separators for screw compressors FP-OS included in the warehouse program
18.06.2018

The Russian manufacturer of refrigeration equipment components "Frigopoint" informs about the inclusion of cyclone oil separators in the warehouse program.